Blogs

Sink Stopper Stuck? Here are 5 ways to Fix It!

Sink Stopper Stuck 1

Having a sink stopper stuck can be a very frustrating ordeal. But don’t worry! In this article, we’ll take a look at five easy ways to fix a stuck sink stopper. So, let’s delve in and rectify those “sink stopper stuck” issues!

Sink Stopper Stuck

What is a Sink Stopper?

Sink stoppers are small but important items that sometimes get taken for granted until they become stuck. It is the tool that sits at the bottom of your sink and plays the role of blocking or unblocking the drain.

 

How Does a Sink Stopper Work?

The sink stopper has a simple design. It is connected to a lever or pull rod, which allows you to move it up or lower it as needed. When you raise it, the sink stopper blocks the sink’s drain, letting you fill the basin with water. When you lower it, the sink stopper opens the drain and allows the water to flow out.

 

5 ways to Fix Sink Stopper Stuck

 

Method 1: Lubrication and Cleaning

 

Removing the Sink Stopper

To start off the repair process, identify the stopper assembly beneath the sink and remove it. Thoroughly inspect it to check for any obstructions or debris that might be obstructing its flow.

 

Cleaning the Stopper and Drain

Now that you’ve removed the stopper, the next step is thorough cleaning. Start by soaking it in warm, soapy water, then utilise a brush to scrub off any built-up dirt. Remember to wipe down the drain opening as well, using a sink brush or pipe cleaner to get rid of any clogs.

 

Lubricating the Mechanism

A little lubrication can be very effective in keeping the sink stopper smooth and in working condition. You can apply a few drops of silicone-based lubricant to the lever system and stopper’s moving parts.

 

Reinstalling the Stopper

After cleaning and lubricating the sink stopper, gently put the stopper back into its place and make sure it fits snugly. Test the lever to see if the stopper now moves properly.

 

Method 2: Using a Plunger and Hot Water

 

Boiling Hot Water

Begin by boiling a pot of water and pouring it down the drain to wash away any stubborn oil or soap residue that may lead to the sink stopper being stuck.

 

Plunging the Sink

Use your sink plunger to create a good seal in the drain opening. Give it a couple of firm plunges to get rid of any debris that might affect the sink stopper’s movement.

 

Testing the Stopper

After using the plunger and hot water, test the sink stopper to see if it is functioning properly. If not, don’t worry; we still have a few moves up our sleeves.

 

Method 4: Disassembling the Stopper Mechanism

 

Gathering Tools

Get ready for some hands-on work! Gather the tools you need, such as a wrench, screwdriver, and pliers. Ensure the workspace under the sink is tidy.

 

Removing the Stopper Assembly

Gently unscrew or loosen the stopper assembly from the lever mechanism. By doing this, you will have access to the parts that might be responsible for it getting stuck.

 

Inspecting and Cleaning the Components

Take your time to look over each part of the stopper assembly carefully. Clear the components thoroughly with a cleaner or vinegar solution.

 

Reassembling the Stopper

After cleaning it, put the stopper mechanism together again and tightly fasten it to the lever. Check the sink stopper to ensure it is not stuck.

 

Method 5: Using a Drain Snake

 

Acquiring a Drain Snake

Time to call in the drain snake to the rescue! You can either purchase one from a hardware store or borrow it from a neighbour.

 

Feeding the Snake Into the Drain

Insert the drain snake into the drain opening and gently feed it down the pipe. Rotate the snake as needed to break up any stubborn clogs.

 

Manoeuvring the Snake to Release the Stopper

Continue manoeuvring the drain snake until you encounter resistance, which might be an indication of the blockage affecting the stopper’s movement.

 

Testing the Stopper

Once you’re done with the drain snake, carefully remove it and test the sink stopper to see if it’s now unstuck and operating smoothly.

 

Why does a Sink Stopper get stuck?

 

Accumulated Debris and Gunk

As time passes, debris like food crumbs, soap residue, and hair can build up in the sink drain and around the stopper. The build-up of this debris may block the stopper’s smooth movement, resulting in it getting stuck.

 

Corrosion and Rust

Exposure to moisture and various substances may contribute to rust and corrosion on the stopper and its various parts. This corrosion can cause friction and resistance, hindering the stopper’s ability to function properly.

 

Damaged or misaligned parts

At times, the stopper parts can become misaligned or faulty as a result of regular wear and tear or incorrect usage. This misalignment or damage can hinder the stopper from moving freely. This can cause it to get stuck.

 

Problems with the Stopper Mechanism

There may be issues with the stopper mechanism itself, like loose connections, corroded parts, or broken lever operation. These mechanical issues may lead to the stopper getting stuck in a specific position.

 

Preventive Measures to Avoid Future Stuck Sink Stoppers

 

Proper Maintenance Tips

  • Always clean the sink stopper and drain to avoid the buildup of residue and debris.
  • Regularly inspecting the washbasin stopper mechanism. This will enable you to identify the first signs of wear or damage and take prompt action.

 

When to Seek Professional Help

If you’ve tried all the methods in this article, and the sink stopper remains stuck, it might be a sign of a more complex issue. It’s best to call a qualified plumber for help in these kinds of situations.

Share This: